Archive for the ‘ Hardware ’ Category
I’ve gotten bored of trying to balance bits of old disposable BBQ on rocks when camping so I decided to make a folding grill. The parts list is pretty simple - 2m of 25×25x3mm Angle Iron 2m of 25×15x3mm Angle Iron 5m of 3mm steel rod 300×300mm steel plate 4 x nuts and bolts This is also a good excuse for me [ READ MORE ]
PCB bubble etch tank. This project started out because of a need to etch circuit boards and a lack of success doing it the cheap ‘etchant in a tray’ method. Heated bubble etch tanks were well over my budget and at five liters were also too large. As always eBay came to the rescue by providing [ READ MORE ]
